| Specifications |
| Bandwidth |
100 MHz |
| Sample rate(Real time) |
1GS/s (500MS/s for dual channels) |
| Horizontal Scale(S/div) |
2ns/div-100s/div step by 1-2-5 |
| Rise time |
≤3.5ns |
| Display |
8.0'' color LCD, TFT Screen, 640x480 pixels, 65535 colors |
| Channels |
Dual channels + external trigger |
| Input impedance |
1MΩ±2% in paralel with 15pF±5pF |
| Max. input voltage |
400V (DC + AC PK-PK) |
| Record length |
Max. 2M points |
| Probe attenuation factor |
1X, 10X, 100X, 1000X |
| Inerpolation |
(sin x)/x |
| Vertical sensitivity |
2mV/div~10V/div (at imput) |
| DC Gain Accuracy |
±3% |
| DC accuracy(Average) |
Average>16:±(3%reading+0.05div) for ΔV |
| Acquisition modes |
Normal, Peak Detect, Average |
| Trigger type |
Edge, Video Alternate, Pulse, Slope |
| Cursor Measurement |
ΔV and ΔT between cursor |
| Waveform Math |
+, -, x, ÷, FFT |
| Waveform storage |
4 waveforms |
| Trigger Mode |
Auto, Normal, Signal |
| Lissajou’s figure |
Bandwidth |
25MHz |
| Phase difference |
±3 degrees |
| Communication interface |
USB, Support USB Flash Disk Storage |
| Fuse |
2A, T grade, 250V |
| Cymometer |
Available |
| Power Supply |
110V-240V ACRMS, 50/60Hz, CAT II |
| Logic Analyzer Characteristics |
| Sample rate (real time) |
20S/s~2GS/s |
| Bandwidth |
200MHz |
| Threshold Voltage |
±6V (4 Settings) |
| Input signal range |
±30V |
| Channels |
16 |
| Record length |
4M/channel |
| Input impedance |
660Kst±5% |
| Trigger mode |
Edge trigger, Bus trigger, Pattern trigger, Sequential queue trigger, Data width trigger, Distributed queue trigger |
| Trigger position setting |
pre-trigger, mid-trigger, re-trigger |
| Data System |
Binary system, Decimal system, Hex |
|